 |
 |
 |
 |
 |
 |
 |
 |
 |
|---|
 |
CDI’s mechanical torque product lines include click type torque wrenches, dial indicating torque wrenches, torque limiting screwdrivers and a number of special application torque products. CDI has long been a major innovator and leader in electronic torque measurement and torque calibration equipment.
|
 |
COMPUTORQ IIThe COMPUTORQ II is our state-of-the-art Digital Programmable Torque Wrench. It has many applications, including precision torquing of critical fasteners, tracking applied torque for quality control testing, as well as destructive component testing. The Computorq II is easy to program using the soft touch keypad. Simply program a "target" torque including upper and lower limits, and the wrench will signal with a beep when that torque setting is reached. If the user exceeds the target torque, an alarm tone sounds and the red light flashes. Computorq II is available in six models with ranges from 5 in. lbs. up to 1000 ft. lbs. Check out the new COMPUTORQ3.
|
|---|
|
|
Model DPT seriesThe CDI Model DPT series of torque multipliers are constructed of a two piece aluminum housing, special gear train, a stainless steel reaction device and a digital torque display. The display measures output torque directly in foot pounds when the load is reacted through the two pins on the output side of the housing. This reaction force is transferred to the electronics, which in turn sends the signal to the digital display for precise torque readings to the nearest foot pound. An adapter is required to interface with the application. |
 |
ETT (Electronic Torque Tester)The ETT (Electronic Torque Tester) is CDI’s portable torque tester. Unlike a torque calibration system, which can be used to generate a torque wrench certification, the ETT is a portable, battery powered stand-alone torque tester. It can also be used on AC power. Its primary use is to check the accuracy of dial and click type torque wrenches, as well as torque screwdrivers to maintain their accuracy in between calibrations. With the addition of a joint rate simulator, ETT can also check stall and clutch type pneumatic and electronic torque tools. It should not be used with any impact or pulse type tools. There are eight models with torque ranges from 10 inch ounces up to 600 foot pounds.
|
CDI have a full time Product Development Team dedicated to develop and deliver innovative new torque products. |
|---|
 |
 |
|---|
| CDI Torque Tools | CDI Torque Testers/Calibration Equip. |
|
|---|